Horizontal tube of non-uniform cross-section has radius of $0.2\,m$ and $0.1\,m$ respectively at $P$ and $Q$ . For streamline flow of liquid, the rate of liquid flow
Horizontal tube of non-uniform cross-section has radius of $0.2\,m$ and $0.1\,m$ respectively at $P$ and $Q$ . For streamline flow of liquid, the rate of liquid flow
- A
greater at $P$ than $Q$
- B
greater at $Q$ than $P$
- C
changing continuously with time
- D
same at $P$ and $Q$
Similar Questions
The diagram below shows a hydraulic lift. A force is applied at side $1$ and an output force is generated at side $2$ . Which of the following is true?
The diagram below shows a hydraulic lift. A force is applied at side $1$ and an output force is generated at side $2$ . Which of the following is true?
If work done in increasing the size of a soap film from $10\, cm\times6\, cm$ to $60\, cm\times11\, cm$ is $2\times10^{-4}\, J$. What is the surface tension ?
If work done in increasing the size of a soap film from $10\, cm\times6\, cm$ to $60\, cm\times11\, cm$ is $2\times10^{-4}\, J$. What is the surface tension ?
Water is flowing through two horizontal pipes of different diameters which are connected together. The diameters of the two pipes are $3\, cm$ and $6\, cm$ respectively. If the speed of water in narrower pipe is $4\, m/sec$ and the pressure is $2.0\times10^4$ pascal, then the speed of water in the wider pipe is ........ $m/sec$
Water is flowing through two horizontal pipes of different diameters which are connected together. The diameters of the two pipes are $3\, cm$ and $6\, cm$ respectively. If the speed of water in narrower pipe is $4\, m/sec$ and the pressure is $2.0\times10^4$ pascal, then the speed of water in the wider pipe is ........ $m/sec$
A tank is filled upto a height $h$ with a liquid and is placed on a platform of height $h$ from the ground. To get maximum range $x_m$ a small hole is punched at a distance of $y$ from the free surface of the liquid. Then
A tank is filled upto a height $h$ with a liquid and is placed on a platform of height $h$ from the ground. To get maximum range $x_m$ a small hole is punched at a distance of $y$ from the free surface of the liquid. Then
A large open tank has two holes in its wall. One is a square of side $a$ at a depth $x$ from the top and the other is a circular hole of radius $r$ at depth $4 x$ from the top. When the tank is completely filled with water, the quantities of water flowing out per second from both holes are the same. Then $r$ is equal to ..........
A large open tank has two holes in its wall. One is a square of side $a$ at a depth $x$ from the top and the other is a circular hole of radius $r$ at depth $4 x$ from the top. When the tank is completely filled with water, the quantities of water flowing out per second from both holes are the same. Then $r$ is equal to ..........